Distribution Transformer Manufacturer in China
Hebei Youge Electrical Equipment Co., Ltd. builds oil-immersed and cast resin distribution transformers from 15 kVA to 16,000 kVA. Winding, vacuum drying and routine testing happen in our own factory in Baoding, Hebei, so the nameplate that ships with your unit carries the figures we measured.
Browse the product range · Tel +86 15867897761 · WhatsApp +852 54162620
Distribution transformers we build
Nine product lines, all built in the same factory. Send the rating and the primary voltage and we will quote against it.
Distribution Transformers
50–3150 kVA, 11 / 22 / 33 kV primary
Medium Voltage Transformers
Up to 35 kV primary for utility and CIS grids
Industrial Transformers
Plant and process loads, 50 Hz and 60 Hz
Commercial Transformers
Buildings, malls, hotels and hospitals
Three Phase Transformers
Dyn11 and Yyn0, copper or aluminium winding
Oil Immersed Transformers
250–16000 kVA, ONAN, sealed or conservator
Dry Type Transformers
50–6000 kVA cast resin, indoor installation
Pad Mounted Transformers
500–5000 kVA, loop or radial feed
Pole Mounted Transformers
15–333 kVA for overhead distribution lines
A factory, not a trading desk
Most exporters in this range buy from a workshop and put their own plate on the tank. We stack the cores, wind the coils, dry the assemblies under vacuum, fill the tanks and run the tests ourselves. That is why we can hold loss and impedance tolerances across a batch, and why the lead time we quote is the lead time we keep.
We started in 2016 and ship to utilities, EPC contractors and industrial buyers in Asia, Africa and the Middle East. If you need a unit that does not match a catalogue page, that is the enquiry we prefer.
Company at a glance
- Established 2016. Registered capital RMB 48 million, paid-in RMB 26 million.
- 49 people on the payroll, including the engineers who wind and test your units.
- Factory in Gaojing Village, Fangshunqiao Town, Mancheng District, Baoding, Hebei.
- Provincial “Specialized, Refined, Differentiated & Innovative” SME (2026).
- Provincial science and technology-based SME (2025).
- Licensed for power facility installation, repair and testing.
- Patents: secondary pressure leak testing for oil-immersed transformers; intelligent dual-transformer packaged substation.
Where our transformers run
Why buyers stay with us
Six things that decide repeat orders in this business.
- Cores and windings made in-house. We do not buy semi-finished units and rebrand them.
- Routine tests on every transformer: winding resistance, ratio, insulation resistance, impedance voltage, applied and induced voltage.
- 50 Hz and 60 Hz designs, including 13.8 kV and 34.5 kV for 60 Hz grids and 6 / 10 / 35 kV for CIS grids.
- Copper or aluminium windings, Dyn11 or Yyn0, ONAN cooling, off-circuit or on-load tap changer.
- Export packing, test reports and drawings prepared for utility tender submission.
- You talk to the factory. RFQ goes straight to the engineer who will build the unit.
Certificates and qualifications
Send us the specification
Rating, primary and secondary voltage, frequency, quantity and the application. A drawing or a photo of the old nameplate helps. We answer within one working day.
Email info@xsdfftransformer.com · WhatsApp +852 54162620